BYGFY - PLB9-2X, CUSTOM PLASMA STANDARD - 1,000 PPM (SUPDAT)

  • MSDS: BYGFY
  • Manufacturer: SPEX INDUSTRIES INC
  • Product Name: PLB9-2X, CUSTOM PLASMA STANDARD - 1,000 PPM (SUPDAT)
  • National Stock Number: 6850-00N020467
Product Identification

Product ID:PLB9-2X, CUSTOM PLASMA STANDARD - 1,000 PPM (SUPDAT)
MSDS Date:11/17/1993
FSC:6850
NIIN:00N020467
MSDS Number: BYGFY

Responsible Party
SPEX INDUSTRIES INC
3880 PARK AVE
EDISON, NJ 08820
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 908-549-7144

Preparer: VANAJA SIVAKUMAN

Cage: 07977

Contractor
SPEX CERTIPREP INC
METUCHEN, NJ 08840 US

Telephone: 732-549-7144

Cage: 07977

Ingredients

AMMONIUM TETRABORATE; ((NH*4)*2B*4O*7-4H*2O) % WT

CAS: 12007-58-8

Fraction By Weight: <4.4%

OSHA PEL N/K

ACGIH TLV: N/K


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 90-97%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS SOLUTION MAY BE HARMFUL IF
INHALED, INGESTED OR CONTACTED WITH THE SKIN OR EYES. AMMONIUM
TETRABORATE MAY BE HARMFUL TO THE RESPIRATORY TRACT IF INHALED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES OCCASIONALLY
LIFTING UPPER & LOWER EYELIDS. SKIN: REMOVE CONTAMINATED CLOTHING,
THEN FLUSH WITH WATER FOR AT LEAST 15 MINUTES. WASH CLOTHING
THOROUGHLY B EFORE REUSE. INHAL: MOVE TO FRESH AIR. IF IRRITATION
CONTINUES, GET MEDICAL ATTENTION IMMEDIATELY. INGEST: GET MEDICAL
ATTENTION IMMEDIATELY. IF CONSCIOUS, GIVE LARGE AMOUNTS OF WATER OR
MILK.

Fire Fighting

Extinguishing Media:APPROPRIATE TO SURROUNDING FIRE CONDITIONS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE. NOT COMBUSTIBLE.

Accidental Release

Spill Release Procedures:VENTILATE AREA. WIPE UP & PUT INTO SEALED
CONTAINER FOR PROPER DISPOSAL. WASH SPILL SITE OFF W/WATER AFTER
MATERIAL PICK-UP IS COMPLETE. WEAR CHEMICAL RESISTANT GLASSES,
GLOVES & CLOTHING. WEAR NIOSH/ MSHA APPROVED RESPIRATOR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. KEEP
TIGHTLY SEALED WHEN NOT IN USE.
Other Precautions:WARNING: MAY CAUSE IRRITATION. AVOID INHALATION,
INGESTION AND CONTACT WITH EYES AND SKIN. IRRITANT.

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE IN A CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:HAVE IMMEDIATE AVAILABILITY OF EYE WASH IN
CASE OF EMERGENCY. CHEMICAL RESISTANT CLOTHING.
Work Hygienic Practices:WASH CAREFULLY AFTER USE.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: BORON IN WATER.

Chemical Properties

Spec Gravity:APPROX 1
Solubility in Water:SOLUBLE
Appearance and Odor:TRANSPARENT SOLUTION WITHOUT AN ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS.
Stability Condition to Avoid:STABLE UNDER NORMAL STORAGE AND USE.
Hazardous Decomposition Products:WILL RELEASE TOXIC FUMES OF AMMONIA.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS . CONTACT LOCAL HAZARDOUS OR CHEMICAL
WASTE DISPOSAL AGENCY FOR REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.